Cleaning The Copier; Cleaning The Slit Glass - Kyocera TASKalfa 620 Operation Manual

Maintenance

Cleaning the Copier

Clean the copier regularly to ensure optimum copy quality.
Cleaning the Document Processor and Platen
Open the document processor. Using a soft cloth
dampened with alcohol or mild detergent, wipe the
platen and the backside of the document processor.
IMPORTANT: Do not use thinner or other organic
solvents.

Cleaning the Slit Glass

Use the cloth provided with the copier to
clean the top and bottom slit glass. The
appearance of black lines on copies
when the document processor is used is
a sign that the slit glass is possibly
soiled.
The message Clean the slit glass for
original fed from DP (Clean the slit glass
for original fed) may be displayed if the
slit glass requires cleaning. After
cleaning it, press [End].
The appearance of white lines on copies is a sign that the roller of the document processor is
possibly soiled.
IMPORTANT: Use a dry cloth to clean the slit glass softly. To wipe out the glue or ink dirt, use
alcohol. Do not use water or organic solvents such as thinner.
5-2
For safety, always unplug the power cord before cleaning the copier.
Caution
Clean the slit glass for original fed from DP.
1.Open the document processor .
2.Clean the surface of narrower glass
located at left with a dry cloth.
3.Please close the document processor .
4.Press [END].
If the slit glass is dirty, black line
will appear on the copy .