Depression On The Leading Edge Is Left; The Size Of Clear Film Cannot Be Detected; Roll Paper Is Continuously Ejected - Canon imagePROGRAF iPF760 User Manual

Depression on the leading edge is left

Depression on the leading edge is left Depression on the leading edge is left
Keeping a roll in the printer for a long time without
printing on it may leave a depression on the lead-
ing edge.

The size of clear film cannot be detected

The size of clear film cannot be detected
The Platen is soiled with ink or other substances.

Roll Paper is Continuously Ejected

Roll Paper is Continuously Ejected
Cause
Although sheets are se-
lected as the paper
source, a roll was ad-
vanced.
610
Cause
Cause
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
After roll ejection stops, follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Open the Roll Cover.
3.
Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that both ends of
the roll are rewound evenly.
4.
Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select Load Roll Paper.
(See "Loading Rolls in the Printer.")
When printing quality is most important, we recommend setting TrimEdge Reload to On
or Automatic so that the paper edge is automatically cut before printing.
(See "Menu Structure.")
→P.486
Corrective Action
Corrective Action
→P.442
Corrective Action
→P.590
iPF760
User's Guide