Canon imagePROGRAF iPF760 User Manual page 120

Printing on Non-Standard Paper Sizes (Windows)
7
Click the Page Setup tab to display the Page Setup
sheet.
8
O
Click Size Options to display the Paper Size Options dialog box.
9
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10
Select mm in Units.
11
Enter 430 (16.9 in) in both Width and Height.
•
Note
12
Click Add to register 430 mm Square.
13
Click OK to close the Paper Size Options dialog box.
14
Click Cut Sheet in the
15
A
In the Page Size list, click the size you added,430 mm Square.
16
Confirm the print settings and print as desired.
•
Note
Printing by using Custom Size
This section describes how to print using Custom Size based on the following example.
• Document: Any Type
• Page size: Square of non-standard dimensions (430×430 mm [16.9×16.9 in])
• Paper: Sheets
120
• Paper type: Any type
Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
•
1
Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width or Height,
the other value will be automatically applied based on the original aspect ratio.
L
Paper Source list.
For tips on confirming print settings, see " Confirming Print Settings(Windows) "
→P.179
User's Guide
iPF760