To Start From Microsoft Word - Canon imagePROGRAF iPF760 User Manual

To start from Microsoft Word

3
If Addin imageprograf print plug-in (ipfaddinif.dll) is
displayed in the Disabled Items dialog box, select it
and click the Enable button.
4
Close all the dialog boxes and restart the Office application.

To start from Microsoft Word

To start from Microsoft Word
Below are the steps to start Print Plug-In for Office from Microsoft Word.
1
Start Microsoft Word.
2
If Start imagePROGRAF Print Plug-In is displayed on the toolbar/
ribbon, click it.
Important
3
Check that the imagePROGRAF Print Plug-In toolbar/ribbon
is displayed.
4
Click the buttons on the toolbar/ribbon according to the items you want to set.
Menu
Printer list
Print Button
260
Paper Settings Button
•
If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
•
When Print Plug-In for Office is not displayed
Icon
Displays the About, Help, and Special Settings dialog boxes.
You can change the settings using the Special Settings dialog box.
Refer to Configuring Special Settings
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed again. Select
this when you want to display all printer drivers or update the display.
The print Wizard is displayed.
The settings Print Matching Roll Width, Borderless Printing, Multi-Page Printing, and Print
Using Registered Settings can be set.
Large-Format Wizard is displayed.
Settings for Portrait or Landscape Orientation can be set.
→P.256
Contents
for details.
→P.291
iPF760
User's Guide