View Settings Dialog Box For The Printing Application - Canon imagePROGRAF iPF760 User Manual

Large format printer

Hide thumbs Also See for imagePROGRAF iPF760:

Table of Contents

View settings Dialog Box for the Printing Application

Select the paper type.

For information on the types of paper the printer supports, refer to the Paper Reference Guide.(See " Types of Pa-

Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.

(See " Specifying the Ink Drying Time for Rolls

Between Pages

Specify the time the printer waits after printing a page until ejecting the paper, as needed.

Between Scans

Specify the time the printer waits after printing a line on the page until printing the next line, as needed.

Roll Paper Margin for Safety

You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is

held firmly against the Platen.

Near End Margin

Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.

Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automat-

ic cutting is used.

Automatic Cutting

You can activate or deactivate automatic cutting and printing of cut lines, as desired. In this list, specify Printer

Default, None, or Print Cut Guideline.

Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image

with the left and right sides inverted.

In the View settings dialog box, you can check details of the selected printing application.

To display the View settings dialog box, on the Main pane, click View settings by Print Target.(See " Main Pane

User's Guide

Show Quick Links

Table of Contents