Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty; Sheet Printing Is Selected - Canon imagePROGRAF iPF760 User Manual

Roll printing is selected, but sheets are loaded.

You have attempted to print a test print sheet or other
printer status information on a roll, but no roll is loaded.
Roll printing is selected, but sheets are loaded.
Roll printing is selected, but sheets are loaded.
A print job for rolls was received when a sheet is
loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty.
There is remaining
roll paper, but be-
cause it could not be
advanced, it could
not be detected.

Sheet printing is selected.

Sheet printing is selected.
You have attempted to print a test print sheet or other print-
er status information on a sheet, but no sheet is loaded.
638
Cause
Cause
Follow these steps to load and print on a roll.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Press the Release Lever back and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
4.
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the
roll, also specify the paper length.
(See "Specifying the Paper Length.")
5.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change the
printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Cause
2.
Load a sheet and try printing again.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.
(See "Removing Sheets.")
→P.466
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Corrective Action
→P.447
→P.450
→P.439
→P.442
→P.445
→P.447
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button. Load the
sheet, and then print.
(See "Loading and Printing on Sheets.")
To print on rolls, follow these steps.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop
printing.
2.
Load a roll and try printing again.
(See "Loading and Printing on Rolls.")
Corrective Action
→P.24
Corrective Action
→P.442
→P.63
Corrective Action
→P.24
→P.21
iPF760
User's Guide