Canon imagePROGRAF iPF760 User Manual page 197

iPF760
For details on available paper sizes, see " Paper Sizes
Paper sizes compatible with borderless printing are shown in the list.
• C
Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
•
Resizing Originals to Match the Paper Size
• Resizing Originals to Fit the Roll Width
• Resizing Originals by Entering a Scaling Value
• D
Fit Paper Size
Scales the document image to match the paper size.
• E
Fit Roll Paper Width
Scales the document image to match the roll width.
• F
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• G
Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see " Paper Sizes
• H
Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation
• K
Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
•
Conserving Roll Paper by Rotating Originals 90 Degrees
• L
Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
• M
Roll Paper Width
Choose the roll width.
For details on available roll widths, see " Paper Sizes
User's Guide
"
→P.434
→P.70
→P.74
→P.80
"
→P.434
→P.166
→P.152
"
→P.434
Page Setup Sheet
197