Table of Contents
Advertisement
USB board
Description
USB board (includes cable)
Before removing the USB board, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the USB board:
1.
Position the computer right-side up.
2.
Release the clips (1) that secure the USB board to the base enclosure.
3.
Lift the USB board (2) straight up and remove it from the computer.
Reverse this procedure to install the USB board.
ENWW
Battery on page
44)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page
53)
Top cover on page
56)
45)
46)
48)
Component replacement procedures
Spare part number
641145-001
63
Advertisement
Table of Contents
