Touchpad Button Board - HP Pavilion g6-1100 Maintenance And Service Manual

Notebook pc
Table of Contents

Advertisement

TouchPad button board

Description
TouchPad button board (includes bracket and cable)
Before removing the TouchPad button board, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the TouchPad button board:
1.
Position the top cover upside down, with the front toward you.
2.
Release the ZIF connector (1), and then disconnect the TouchPad LED ZIF cable (2) from the
TouchPad button.board.
3.
Remove the Phillips PM2.0×3.0 screw (3) that secures the TouchPad bracket to the top cover.
4.
Lift up and remove the TouchPad button board bracket (4). The TouchPad button is fused onto
the TouchPad button board bracket.
Reverse the above procedure to reassemble and install the TouchPad button board.
60
Chapter 4 Removal and replacement procedures
Battery on page
44)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page
53)
Top cover on page
56)
45)
46)
48)
Spare part number
641143-001
ENWW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pavilion g6

Table of Contents