Table of Contents
Advertisement
16.
Remove the display panel (4) from the display enclosure. The display panel is available using
spare part number 647623-001 .
Reverse this procedure to install the display panel.
17.
To replace the display panel brackets, remove the two Phillips PM 3.0×2.0 screws (1) that
secure each bracket to the display panel.
18.
Remove the display brackets (2) from the display panel. The display brackets are available using
spare part number 637191-001.
Reverse this procedure to install the display hinges.
19.
To replace the wireless transceivers, lift up on the silver transceivers (1), and then release the
adhesive material from the display cover.
70
Chapter 4 Removal and replacement procedures
ENWW
Advertisement
Table of Contents
