Table of Contents
Advertisement
10.
To replace the webcam module, lift the webcam module as far from the display enclosure as the
webcam module cable allows.
11.
Disconnect the webcam module cable (1) from the webcam module, and then remove the
webcam module (2). The webcam module is available using spare part number 637197-001.
Reverse this procedure to install the webcam module.
12.
To replace the display hinge covers, remove the two Phillips 3.0×2.5 screws (1) that secure the
covers to the display enclosure.
68
Chapter 4 Removal and replacement procedures
ENWW
Advertisement
Table of Contents
