Table of Contents
Advertisement
7.
Keyboard (see
8.
Top cover (see
9.
USB board (see
10.
Display assembly (see
11.
Power connector (see
12.
System board (see
13.
Heat sink assembly (see
Remove the processor:
1.
Turn the processor locking screw (1) one half-turn counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
ENWW
Keyboard on page
Top cover on page
USB board on page
Display assembly on page
Power connector on page
System board on page
Heat sink assembly on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
53)
56)
63)
65)
64)
72)
76)
Component replacement procedures
81
Advertisement
Table of Contents
