Characters Or Graphics Are Not Printed In Correct Position - Sharp AJ-6110 Online Manual

Characters or Graphics are not Printed in Correct Position

If a document is printed skewed or partly off the paper, follow the steps listed below.
CHECK1 Is the paper size loaded in the tray the
same as that specified in the printer driver?
Check if the "Paper Size" options suit the size of the
paper loaded in the tray.
If the "Fit to Page" setting is activated, make sure that
the paper size selected from the drop-down list of the
"Target Size" option is the same as the size of the
loaded paper.
CHECK2 Is the orientation of document setting
correct?
Click the "Layout" tab in the printer driver setup
screen, and verify if the "Orientation" option is set to
your requirements.
CHECK3 Is the paper loaded correctly?
If a document is physically damaged when it is output
or the image is skewed on the paper, discard the
damaged sheet, reinsert the paper supply and print
again. Insert the paper so that there is no visible space
between the paper and the paper guides.
Reference: See "LOADING PAPER" in the Setup
Guide and Operation Manual for more
details on inserting paper.
CHECK4 Did you correctly specify the margins for
the application in use?
Check the layout of the document margins and the
paper size settings for the application you are using.
Also check if the print settings are specified correctly
to suit the paper size.
Reference: Quality guaranteed area
Me/NT
Troubleshooting
(Windows 95/98/
4.0, Windows 2000/XP)
80