Table of Contents
Advertisement
Nothing Prints
If nothing prints even when the unit is turned on, please wait a few moments. The printer needs a longer time to
process multicoloured or intricate data. If the unit still does not print, refer to the check list below.
CHECK1
Is the correct print port "SPRT" selected?
Make sure that "SPRT" is selected by following the
steps below.
1 1 1 1
Click the "Start" button, select "Settings" and then click
"Printers".
On Windows XP, click the "Start" button, click "Control
Panel", click "Printers and Other Hardware", and then click
"Printers and Faxes".
2 2 2 2
Right-click the "SHARP AJ-6110" printer driver icon,
and then click "Properties".
3 3 3 3
Click the "Details" tab if any of Windows 95/98/Me or
NT 4.0 are utilised. Click the "Ports" tab if Windows
2000/XP is utilised.
If "SPRT" has not been selected on the settings screen, then
select "SPRT".
CHECK2
Is your printer selected correctly in the
current application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected the "SHARP
AJ-6110" displayed in the "Print" dialog box.
If your operating system is Windows 2000/XP, make
sure that "SHARP AJ-6110" printer driver icon is
selected as the current printer.
Check here.
CHECK3
Has the printer driver been installed
properly?
Check if the printer driver has been installed, following
the steps listed below.
1 1 1 1
Click the "Start" button, select "Settings" and then
click "Printers".
On Windows XP, click the "Start" button, click
"Control Panel", click "Printers and Other Hardware",
and then click "Printers and Faxes".
2 2 2 2
Check if the "SHARP AJ-6110" printer driver icon
is shown.
If you still cannot print after confirming the "SHARP
AJ-6110" printer driver icon, the printer driver may not
have been installed correctly. In this case, delete AJ-
6110 software and then reinstall it.
Reference:
Uninstalling AJ-6110
AJ-6110 Software
Troubleshooting
Software,
Reinstalling
83
Advertisement
Table of Contents
