Professional" Scan Preferences ("Preference" Tab) - Sharp AJ-6110 Online Manual

"Professional" Scan Preferences ("Preference" Tab)

This screen allows the scanning speed to be set and permits the loading and saving of settings values.
"Load User Settings" button
By clicking this button, settings saved
previously can be loaded. Choose the name
of the previously saved setting from the list
then click the "Open" button.
"Save User Settings" button
Click this button to save existing settings or to
delete settings that have been previously saved.
To save new settings, click the "Save" button
after entering the file name. When updating
settings that have been previously saved,
choose the desired setting name then click the
"Save" button. If settings are updated and the
file name is not changed, but is kept as "User
Defaults", then these settings will then be used
as the default settings, beginning from the next
time the scanner driver is activated. To delete
settings from the list, choose the file name
containing the unwanted settings, then click the
"Delete" button.
• Settings for "Scanning Mode" and
"Image Area" cannot be saved.
• "User Defaults" cannot be deleted.
• A maximum of 10 files can be saved.
"Standard Mode Setting" button
Click this button to make changes to any of
the "Monitor", "Photo", "FAX" or "OCR"
settings shown on the "Standard" screen.
"About" button
Click for details on the version of the scanner
driver.
On the above screen, click on options shown
in the green boxes to make additional
changes.
Scanning
Quick Scan
Select your scanning priority, by choosing
either quicker scanning or scanning with
better image quality. If priority is placed on
scanning with better image quality, then
remove the check mark from this box.
If the colour mode is set to "Mono 2
gradation", then this setting will not
be available.
"Factory Defaults" button
If this button is clicked, then the dialog box
shown below will be displayed. If the "OK"
button is clicked, then all settings values
within both the "Standard" screen and the
"Professional" screen, as well as the settings
values for "User Defaults" will be returned to
their default values.
Click this button if you do not
want to return your preferences
to the default settings.
Reference:
For details on the various default settings,
refer to Default Settings for the Scanner
Driver.
51