Table of Contents
Advertisement
Aligning the Print Head (part 2)
2 2 2 2
Select a pattern sample for "Pattern B".
Seventeen block figures with a horizontal line on each
horizontal side ( ) are printed in pattern B. Of the
seventeen figures determine which block is most nearly
centred between the horizontal lines and select the
corresponding number.
Example:
-6
-8
-7
-6
-5
-4
-3
-2
-1
3 3 3 3
Select a pattern sample for "Pattern C".
Thirteen lines are printed in pattern C. Of the thirteen
lines determine which line is the straightest and select
the corresponding number.
Example:
-6
Cracked line
-6
-5
-4
-3
-2
-1
+8
B
0
+1 +2 +3 +4 +5 +6 +7 +8
C
+1
Straight line
0
+1 +2 +3 +4 +5 +6
4 4 4 4
Select a pattern sample for "Pattern D".
Thirteen lines are printed in pattern D. Of the thirteen
lines determine which line is the straightest and select
the corresponding number.
Example:
Cracked line
-6
-5
-4
6 6 6 6
Click the "OK" button in the "Align print head"
dialog box.
The print head will align itself.
! If you cannot find any satisfactory pattern sample for
each of "Pattern A" to "Pattern D" settings, select the
best ones among the printed pattern samples, and
then go back to step 3.
! The unit cannot perform other operations while
aligning the print head.
Maintenance
-6
+1
Straight line
D
-3
-2
-1
0
+1 +2 +3 +4 +5 +6
73
Advertisement
Table of Contents
