Standard" Scan Preferences - Sharp AJ-6110 Online Manual

"Standard" Scan Preferences

By default, four scan settings are specified for the four buttons on this screen respectively. You can access the
most frequently used settings with a simple click.
The following settings for scanning through the "Standard" screen are fixed.
Colour Matching: For Printer, Quick Scan: On, Zoom: 100%, Reverse: Off, Auto Contrast/Brightness Adjustment: On, Edge: Normal
"Scanning Type" button
Select from "Monitor", "Photo", "FAX" , and "OCR" button.
Default settings and possible usage for each button are shown below.
Button Default setting
Monitor Colour Mode: Full Colour
Resolution: 75dpi
Photo Colour Mode: Full Colour
Resolution: 200dpi
FAX Colour Mode: Greyscale
Resolution: 200dpi
OCR Colour Mode: Mono 2 gradation
Resolution: 300dpi
Auto Threshold: On
• The preferences for the four buttons listed above can be altered on the
"Professional" screen. Click the "Preference" tab and then click the
"Standard Mode Setting" button.
• When the "Auto Threshold" setting is activated, the preview image may
be different from the scanned image.
• When the "Auto Threshold" setting is deactivated, the "B/W Threshold"
will be 128.
Possible usage
Sets preferences for a scanned item to be
displayed as desktop image, or showed on-
screen.
Sets preferences to scan and print a
picture, image, etc.
Sets preferences to send a pamphlet,
catalogue, etc, by FAX after scanning.
Sets preferences for a scanned item to be
displayed in text data format.
Scanning
46