Check The Connection Between The Unit And Computer - Sharp AJ-6110 Online Manual

Check the Connection between the Unit and Computer

CHECK1 Is the interface cable compatible with the
unit and computer?
Interface cables compatible with this unit are USB and
parallel cables. Check which type of cable is supported
by your computer, and then purchase one of the
following cables accordingly:
USB cable
Shielded twisted pair cable (2m (6feet) Max.: high-
speed transmission equivalent)
Parallel interface cable
IEEE 1284 - Shielded type bi-directional parallel
interface cable (2m (6feet) Max.)
CHECK2 Is the interface cable connected securely?
Check if the interface cable is securely plugged into the
connectors of the unit and computer. It is also advisable
to ensure that the connector pins are not bent.
Reference: See "CONNECTING THE INTERFACE
CABLE" in the Setup Guide and Operation
Manual for more details on interface
connection.
CHECK3 Are any other USB peripherals being
connected along with the unit?
If other USB peripherals are connected through the
same hub, disconnect them to see if the problem still
exists.
If the USB cable becomes disconnected
If the USB cable becomes disconnected, even only once
during the unit's operation, then printing and scanning may be
disrupted.
If this occurs, check the USB cable and ensure that it is
securely connected, then restart the computer.
Troubleshooting
75