Table of Contents
Advertisement
Identifying Unit Problems
When any trouble has occurred in the unit, first, verify whether you can make a copy or not with the unit. Check
the items shown below when the unit does not work properly but it can make a copy.
Reference:
If any copier trouble occurs, refer to "TROUBLESHOOTING" in the Setup Guide and Operation Manual.
Check the Connection between
1
the Unit and Computer
When one of the troubles listed below occurs while
printing, check the corresponding item.
Faint, Uneven or Smeared Print Output
Characters or Graphics are not Printed in Correct Position
Printed Lines are not Straight, or Have Blank Spaces
Unit does not Print in Colour
Nothing Prints
Uninstalling AJ-6110 Software
Reinstalling AJ-6110 Software
Make sure that the unit is not working. You cannot print or scan data from your computer while the unit is making copies or setting
copier preferences.
If you fail to solve the problem after verifying all the items listed above, please contact your authorised SHARP
service centre.
Check Your Computer
2
Failed to Install the Device Driver (when the USB is connected)
Failed to Install the Device Driver (Windows 2000/XP)
A
Printing trouble
B
Scanning trouble
When one of the troubles listed below occurs while
scanning data, check the corresponding item.
Poor Scanning Result
The Scanned Image is Incorrectly Positioned
Unable to Scan the Image
Uninstalling AJ-6110 Software
Reinstalling AJ-6110 Software
Troubleshooting
What type of trouble do
you have?
• Printing trouble
A
• Scanning trouble
B
74
Advertisement
Table of Contents
