Starting the Scanner Driver
Follow the steps shown below to run the scanner driver setup screen. As an example, this instruction is given
using Sharpdesk as a data processing application.
Reference:
Refer to
Scanning an Image
The method for starting the scanner driver differs depending on the type of application. Refer to the manual or the help file of
your application.
1 1 1 1
After starting Sharpdesk, click the "File" menu and
select "Select Scanner".
2 2 2 2
Select "SHARP TWAIN AJ2", and click the "Select" button.
! Depending on your system, "SHARP TWAIN AJ2 1.0
(32-32)" may appear in the "Select Source" screen.
! If you use more than one scanning device, select the
scanner you want to use through the application. The
method for accessing the "Select Scanner" option,
depends upon the application. For more information,
refer to the manual or the help file of your application.
for the detail of scanning process.
Click here.
Click here.
3 3 3 3
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button (
The scanner driver setup screen will appear.
Scanning
).
43