Check Your Computer - Sharp MX-M310 Online Manual

6 TROUBLESHOOTING
Printing does not take place

Check Your Computer

■ Is there enough computer memory or hard disk space?
To use the machine, your computer must have sufficient
memory and hard disk space. If there is insufficient hard disk
space, delete unnecessary files to increase the free space of
the hard disk. If there is insufficient memory, close unnecessary
applications to increase memory available for printing.
Points to check in Windows
■ Are you using a port that was created with Standard
TCP/IP Port?
If you are using a port created using Standard TCP/IP Port,
printing may not take place correctly if "SNMP Status
Enabled" is selected in the port settings of the printer driver.
Open the printer driver properties and click the "Configure
Port" button on the "Ports" tab. In the window that appears,
make sure the "SNMP Status Enabled" checkbox is not
selected .
CO NT E N TS
Points to check on the Macintosh
■ Is AppleTalk enabled?
In Mac OS X, click "Network" in "System Preferences" and
select Ethernet in "Show". Click the "AppleTalk" tab and
make sure that "Make AppleTalk Active" is selected.
In Mac OS 9.0 to 9.2.2, open the "Chooser" from the Apple
menu and make sure that "Active" is selected. Printing is not
possible if "Active" is not selected.
■ Is "Ethernet" selected for the "Connect via" of
AppleTalk? (When using Mac OS 9.0 to 9.2.2.)
Open "AppleTalk" from the "Control Panels" and make sure
that "Ethernet" is selected in the "Connect via" menu.
Printing is not possible if "Ethernet" is not selected.
(part 2)
69