Ricoh SGC 1506 Operating Instructions Manual page 32

Connecting the Machine
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effective].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
1
terface takes precedence.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.56 "Interface Settings"
p.65 "File Transfer"
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see "Interface Setting" and "File
Transfer".
Menu
Interface Setting/IEEE 1394 IPv4 Address
Interface Setting/IEEE 1394 DDNS Configuration
Interface Setting/IEEE 1394 Host Name
Interface Setting/IEEE 1394 Domain Name
Interface Setting/IEEE 1394 WINS Configuration
Interface Setting/IEEE 1394 IPv4 over 1394
Interface Setting/Network IPv4 Gateway Address
Interface Setting/Network DNS Configuration
Interface Setting/Network Effective Protocol
File Transfer
File Transfer
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
24
User Tool
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3/IMAP4 Settings
Key Operator's E-mail Add.
E-mail Communication Port
Scanner Resend Time
Scanner Resend setting
Setting Requirements
Necessary
As required
As required
As required
As required
Necessary
Necessary
As required
Necessary
Necessary
As required
As required
As required
As required
As required
As required
As required
As required