Scanner Features; Scan Settings - Ricoh SGC 1506 Operating Instructions Manual

This chapter describes user tools in the Scanner Features menu.

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner
Features.
❖ Default Scan Settings
Various basic settings (resolution and scan size) can be set. You can register
the scan settings in the same way as specifying them. For details, see "Speci-
fying Send Options", Scanner Reference.
• Resolution
• 100 dpi
• 200 dpi
• 300 dpi
• 400 dpi
• 600 dpi
• Scan Size
• Paper size for setting
[Auto Detect], [A3L], [B4 JISL], [A4K], [A4L], [B5 JISK], [B5 JISL],
[A5K], [A5L], [11×17L], [8
×8
1 1
K], [5
[5 / /
2 2
Custom size paper setting will be as follows: Vertical: 105.0 to 297.0 mm
(4.2 to 11.6 inch), Horizontal: 128.0 to 432.0 mm (5.1 to 17.0 inch)
❖ Original Setting
This setting is available only when you have installed the optional ARDF.
Set the default for whether originals are one-sided or two-sided and if two-
sided, the relationship between those sides. When the originals are always the
same, set this for the default to make operation easier.
• 1 Sided Original
• 2 Sided Orig. (Top to Top)
• 2 Sided Orig. (Top to Bottom)

6. Scanner Features

×14L], [8
1
/
2
×8
1 1
L], [Custom Size]
/ /
2 2
×13L], [8 ×11K], [8
1 1
/ /
2 2
×11L],
1
/
2
143