Registering Folders; Using Smb To Connect - Ricoh SGC 1506 Operating Instructions Manual

Registering Addresses and Users for Facsimile/Scanner Functions

Registering Folders

By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use:
• SMB
For sending files to shared Windows folders.
• FTP
Use when sending files to an FTP server.
• NCP
Use when sending files to an Net- Ware server.
Note
❒ For details about protocols, server names, and folder levels, consult your net-
work administrator.
❒ You can prevent unauthorized users from accessing folders from the ma-
chine. See "Registering a Protection Code".
❒ You can only select either SMB, FTP, or NCP. If you change protocol after fin-
ishing your settings, all previous entries are cleared.
Reference
p.259 "Registering a Protection Code"
7

Using SMB to Connect

Note
❒ To register a folder in an FTP server, see "Using FTP to Connect".
❒ To register a folder in an NetWare server, see "Using NCP to Connect".
Reference
p.219 "Using FTP to Connect"
p.230 "Using NCP to Connect"
To Register an SMB folder
A
Select [System Settings] using {U} or {T}, and then press the {OK} key.
206