Deleting A User Code - Ricoh SGC 1506 Operating Instructions Manual

Deleting a User Code

This section describes how to delete a user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A
Select [System Settings] using {U} or {T}, and then press the {OK} key.
B
Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C
Select [Address Book Management] using {U} or {T}, and then press the {OK} key.
D
Select [Program/Change] using {U} or {T}, and then press the {OK} key.
E
Enter the registration number you want to delete using the number keys,
and then press the {OK} key.
You can automatically specify registration numbers 001-032 by pressing the
Quick Dial keys.
Press [Search] to search by name, destination list, registration number, user
code, fax number, or folder destination.
Authentication Information
7
167