Ricoh SGC 1506 Operating Instructions Manual page 243

❒ To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.
❒ When [Do not Specify] is selected, the NCP User Name and NCP Password
that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.
❒ If User Authentication is specified, contact your administrator.
Reference
p.156 "Registering Names"
p.235 "To locate the folder manually"
p.236 "To locate the folder using Browse Network"
"Entering Text", About This Machine
To locate the folder manually
A
Select [Manual Entry] using {U} or {T}, and then press the {OK} key.
B
Enter the path name, and then press the {OK} key.
C
Press [Con.Test] to check the path is set correctly.
D
Press [Exit].
Registering Folders
235
7