Sending Scan Files By E-Mail; Procedure For Sending E-Mail - Ricoh Type 2075 Operating Instructions Manual

Sending Scan Files by E-mail

Procedure for Sending E-mail

A scan file is sent after scan settings
and destinations are specified.
A A A A
Press the { { { { Scanner} } } } key.
Note
❒ The illustration is an example.
The actual appearance may be
different.
B B B B
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the { { { { Clear Modes} } } } key.
C C C C
Place originals.
Reference
The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see "Placing Originals", Copy
Reference.
D D D D
Make settings for original orien-
tation, the sides scanned, and oth-
er settings if necessary.
Reference
p.73 "Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides"
E E E E
Make the scan settings.
Reference
There are two ways to specify
scan settings, as described below:
• Configure each setting for
scanning. For details, see
p.71 "Specifying Scan Set-
tings".
• Recall registered settings. For
details, see p.79 "Programs".
F F F F
If the network delivery scanner
screen appears, switch to the the
e-mail screen.
ZZZ607S
A Press [
B Press [Switch Destination List].
C Press [E-mail].
D Press [Exit].
The e-mail screen appears.
G G G G
Specify the destination.
You can specify the destination in
the following ways:
• Select it from the destination
list.
• Specify its registration number.
• Enter the e-mail address directly.
• Search for it in the destination
list.
• Search for it in the LDAP server.
Sending Scan Files by E-mail
].
2
17