Ricoh Type 2075 Operating Instructions Manual page 51

G G G G
Specify file information.
Specify a user name, file name, and
password for the file.
Reference
For details about specifying file
information, see p.43 "Specify-
ing file information".
H H H H
Press the { { { { Start} } } } key.
Note
❒ To interrupt scanning, press the
{ { { { Clear/Stop} } } } key or press [Stop]
on the display panel.
❒ When placing multiple origi-
nals one-by-one, place the next
original. For details, see p.76
"Scanning Originals in Several
Times".
Specifying file information
You can specify a user name, file
name, and password for a stored scan
file.
According to the settings made, you
can search for files by user name or
file name and you can prevent unau-
thorized persons from accessing the
files.
Reference
For details about the maximum
number of characters that can be
entered, see p.116 "Store".
A A A A
Press [Store File].
The File Information screen ap-
pears.
B B B B
Specify file information.
Specifying a user name
A Press [User Name].
B Select the user name.
Note
❒ The user names shown here
are names that were regis-
tered on the [Administrator
Tools] tab in [System Settings].
To specify a name not shown
here, press [Non-programmed
Name], and then enter the
user name.
C Press [OK].
Storing Files
4
43