Page Numbering - Ricoh SP 5200S Operating Instructions Manual

5. Copier and Document Server Features
You can adjust the position of the date stamp within the available ranges shown below.
"Top Left" T/B: 4 118 mm, L/R: 4 118 mm
"Top Center" T/B: 4 118 mm, L/R: 59 59 mm
"Top Right" T/B: 4 118 mm, L/R: 4 118 mm
"Bottom Left" T/B: 4 118 mm, L/R: 4 118 mm
"Bottom Center" T/B: 4 118 mm, L/R: 59 59 mm
"Bottom Right" T/B: 4 118 mm, L/R: 4 118 mm
"Top Left" T/B: 0.1 4.6 inches, L/R: 0.1 4.6 inches
"Top Center" T/B: 0.1 4.6 inches, L/R: 2.3 2.3 inches
"Top Right" T/B: 0.1 4.6 inches, L/R: 0.1 4.6 inches
5
"Bottom Left" T/B: 0.1 4.6 inches, L/R: 0.1 4.6 inches
"Bottom Center" T/B: 0.1 4.6 inches, L/R: 2.3 2.3 inches
"Bottom Right" T/B: 0.1 4.6 inches, L/R: 0.1 4.6 inches
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]

Page Numbering

This section describes the user tools in the Page Numbering menu under Stamp.
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Default: [P1,P2...]
Font
You can select the font in Page Numbering mode.
Default: [Font 1]
Size
You can set the size of the stamp printed in Page Numbering mode.
Default: [Auto]
Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed in Duplex mode.
Default: [Opposite Position]
192
(mainly Europe and Asia)
(mainly North America)