Registering Frequently Used Functions For Printing Stored Documents From The Document Server; Changing The Default Functions Of The Document Server's Initial Display - Ricoh SP 5200S Operating Instructions Manual

4. Document Server
Registering Frequently Used Functions for Printing Stored Documents from the
Document Server
You can store frequently used Document Server print job settings in the machine memory and recall them
for future use.
The settings you can store are as follows:
• The number of prints
• 2 Sided Copy, Booklet, Magazine
• Finishing (Sort, Stack, Staple)
• Cover/Slip Sheet (Front Cover, Front/Back Cover, Designate/Chapter, Slip Sheet)
4
• Edit / Stamp (Margin Adj., Stamp)
For details about how to store these settings, see "Registering Frequently Used Functions".
• p.83 "Registering Frequently Used Functions"

Changing the Default Functions of the Document Server's Initial Display

You can configure the settings of the initial document print screen or the initial scan original screen.
The initial document print screen appears when [To Printing Screen] on the document selection screen is
pressed. The initial scan original screen appears when [Scan Original] on the document selection screen
is pressed.
The functions you can specify as the default functions of the initial screens are as follows:
• Initial document print screen
Finishing, Cover/Slip Sheet, Edit / Stamp, 2 Sided Copy, Booklet, Magazine, number of prints
• Initial scan original screen
Paper Tray, Original Type, Density, Original Settng, Edit Image, Duplex/Combine, Reduce /
Enlarge
For details about how to configure the default functions displayed on the initial document print screen,
see "Changing the Default Functions of the Copy's Initial Display".
To configure the default functions displayed on the initial scan original screen, press the [Program] key
and then press [Program].
• p.87 "Changing the Default Functions of the Copy's Initial Display"
174