Copying Onto Thick Paper - Ricoh SP 5200S Operating Instructions Manual

2. Basic Copying
5. Select [OHP (Transparency)] or [Thin Paper], and then press [OK].
2
6. Specify the paper size.
7. Press [OK].
8. Place the originals, and then press the [Start] key.
• Printing on OHP transparencies may be slower than printing on plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• Load OHP transparencies one by one if multiple sheet feeding occurs.

Copying onto Thick Paper

When copying onto thick paper, select the type and size of paper.
• The Duplex function cannot be used with paper that is classifiable as Thick Paper 3. If [1 Sided
Sided] is selected, cancel the setting.
1. Open the bypass tray.
2. Insert the paper face up until you hear the beep, and then align the paper guides to the
paper size.
The bypass tray ( ) is selected on the display.
3. Press the [ ] key.
4. Press [Paper Type].
44
2