Copying Onto Envelopes From The Bypass Tray - Ricoh SP 5200S Operating Instructions Manual

5. Select a paper weight from Thick Paper 1 to 3, and then press [OK].
Select [Thick Paper 1] when paper weight is between 106 g/m
lb. Bond).
Select [Thick Paper 2] when paper weight is between 131 g/m
lb. Index).
Select [Thick Paper 3] when paper weight is between 164 g/m
(80 lb. Cover).
6. Specify the paper size.
7. Press [OK].
8. Place the originals, and then press the [Start] key.
• Printing on thick paper may be slower than printing on plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.

Copying onto Envelopes from the Bypass Tray

When copying onto envelopes, specify the paper type and paper size.
• Before using this function, select [Envelope] under Paper Type: Bypass Tray in User Tools. For
details, see "System Settings", Network and System Settings Reference.
• The Duplex function cannot be used with envelopes. If [1 Sided
setting.
Copying from the Bypass Tray
2
(28 lb. Bond) and 130 g/m
2
(35 lb. Bond) and 163 g/m
2
(90 lb. Index) and 220 g/m
2 Sided] is selected, cancel the
2
2
(35
2
(90
2
45