Advertisement
For the right side of a split-vat or for a full-vat: Press the right
(maximum of 5 for Fahrenheit or 3 for Celsius). Press the right
(maximum of 5 for Fahrenheit or 3 for Celsius).
5. Press the
switch to save the settings.
6. Press either ON/OFF switch
How to Activate or Deactivate the Frypot BOIL-OUT Feature
1. Enter the setup mode. See How to Enter the Setup Mode on Page 3-8.
2. Press and release the
3. Press the right
or
1
4. Press the
switch to save the settings.
5. Press either ON/OFF switch
3.6.2 M-100B™ Computer Programming Mode
How to Enter the Program Mode
1. Press the ON/OFF
left product selection switch
three switches at the same time.
2. When the program mode has been entered, the display will flash M-100B computer
briefly, followed by the software version number. After a few seconds, Fr fries yes or
Fr fries no will be displayed, depending upon previous program settings.
How to Reset the Computer to the Factory Defaults
While in the program mode, press all 4 cook switches (left and right
the computer to the factory defaults. See How to Enter the Program Mode above. Updating
menu will flash in the display, followed by epra cleared and cooks cleared
After a few seconds, Fr fries yes will be displayed, indicating that the computer has been
reset to the factory defaults.
How to Change the Shake, Pull, Or Quality Times for Menu Items
1. Enter the program mode. (See How to Enter the Program Mode above.)
2. Press and release the
to exit the setup mode. Both displays will change to OFF.
switch until BOIL-OUT appears in the display.
switch to toggle the boil-out mode ON or OFF.
2
to exit the setup mode. Both displays will change to OFF.
switches until both displays of cooking computer indicate
and the left
switch until the product to be changed appears in the left display.
2
and
cook switches simultaneously. Release all
1
2
1
3–10
switch to go UP a degree
1
switch to go DOWN a degree
. Press the
OFF
and
) simultaneously to reset
2
.
Advertisement
