Advertisement
Open Drain Valve Indication
If, when the ON/OFF
switch is pressed to the ON position, the display reads IGNITION
FAILURE, verify that the drain valve is fully closed. A drain safety switch built into the drain valve
assembly prevents the coil of the gas valve(s) from being energized if the drain valve is not
completely closed. After verifying that the valve is fully closed, turn the computer OFF* for at least 5
seconds, then turn it back on. If the message reappears, there is a problem in the electrical circuitry of
the fryer or the computer. Contact your Frymaster Factory Authorized Service Center (FASC).
* On early-version M-100B split-vat units, BOTH computers must be turned off, even though the
problem condition may be associated with only one vat.
Low Temperature Indication
If the frypot temperature drops to more than 45°F (25°C) below the programmed setpoint temperature
during the cooking cycle, the cook switches will lock, the display will flash lOW TEMP and an
audible alarm will sound. If the frypot temperature returns to a range between 45°F (25°C) to 15°F
(8°C) of setpoint, the audible alarm will stop, but the cook switches remain locked and the display
3–6
Advertisement
