Download Print this page

Equipment Description; Installation, Operating, And Service Personnel - Frymaster FE155 Installation And Operation Manual

Frymaster fe155 rethermalizer installation and operation manual

Advertisement

DANGER boxes contain information about actions or conditions that may cause or
result in injury to personnel, and which may cause damage to your system and/or
cause your system to malfunction.
1.3

Equipment Description

The FE155 Series is specifically designed to rethermalize meats, sauces, and other vacuum pack-
aged foods at a safe temperature range.
The system features a controller and an easy to clean vat. Each unit can rethermalize up to 30 lbs.
(13.6 kg) of food an hour.
The cookpot is safeguarded against boil-over by a standpipe overflow drain, and comes with a 1"
cookpot drain for fast, clog-free emptying. The unit has a rethermalizing/cooking area of 14.25" x
19" (362mm x 482mm) and holds 16.5 gallons (62 liters) of water.
1.4
European Community (CE) Specific Information
The European Community (CE) has established certain specific standards
regarding equipment of this type. Whenever a difference exists between CE
and non-CE standards, the information or instructions concerned are identi-
fied with a shadowed box like the one at right.
1.5

Installation, Operating, and Service Personnel

Operating information for Frymaster equipment has been prepared for use by qualified and/or au-
thorized personnel only, as defined in Section 1.6.
All installation and service on Frymaster equipment must be performed by qualified, certi-
fied, licensed, and or/authorized installation or service personnel, as defined in Section 1.5.
1
.6
Definitions
QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL
Qualified/authorized operating personnel are those who have carefully read the information in this
manual and have familiarized themselves with the equipment functions, or who have had previous
experience with the operation of the equipment covered in this manual.
QUALIFIED INSTALLATION PERSONNEL
Qualified installation personnel are individuals, or firms, corporations, or companies which, either
in person or through a representative, are engaged in and are responsible for the installation of
electrical appliances. Qualified personnel must be experienced in such work, be familiar with all
electrical precautions involved, and have complied with all requirements of applicable national and
local codes.
1-2
CE Standard

Advertisement

loading