Advertisement
3.2
Controller
This equipment uses a specialized controller.
Computer Operation
• Ensure the main power switch (behind cabinet door) is on.
• Press either ON/OFF button to turn the computer on.
• The computer displays LO as it rises to the preset 190°F setpoint for simmer.
• At setpoint, the computer displays alternate between dashed lines and S inn.
• Press a Temperature key to toggle display to actual temperature on the left, setpoint on the
right. Press again to toggle back.
Simmer
• Place product in vat and press desired timer key. Display alternates
between S inn and remaining cook time.
• COOC appears and an alarm sounds when the cook time elapses. Cook
cycles won't start if the computer is displaying LO.
• Remove the product and press the timer key to halt the alarm.
Boil
• Press the boil key.
• Display changes to boil.
• Wait until water boils.
• Place product in vat and press the desired timer key.
Temperature keys are inactive.
• Display alternates between boil and the remaining
cook time.
• COOC appears and an alarm sounds when the cook time elapses.
• Remove the product and press the timer key to halt the alarm.
NOTE: Pressing the Boil key with
the computer OFF produces a
CodE display, which is used in ini-
tial programming. ON/OFF keys
are inactive. Press any other key
four times to clear display and
reactivate ON/OFF keys.
3-2
NOTE: Computer re-
turns to simmer mode
if a boil cook cycle is
not initiated within 15
minutes of pressing
the boil key.
Advertisement
