Table of Contents
Advertisement
Making the Image Lighter or Darker
To lighten or darken an image when it is faxed:
1.
On the control panel, press the Fax button.
2.
Select
Lighten/Darken
3.
Press the Forward Arrow or Back Arrow to lighten or darken the fax, and then press the OK button.
Note:
The factory default is Normal.
Delay Sending a Fax
To send a fax at a specified time (within 24 hours):
1.
On the control panel, press the Fax button.
2.
Select
Delayed Start
3.
Select
, and then press the OK button.
On
4.
Select the time to send the fax:
■
Select a number from
button to select minutes.
■
Select a number from
5.
Press the Start button.
The fax is scanned and saved to be sent at the time you specified.
Note:
If the printer is turned
immediately after the printer is turned back
Enabling Color Fax
Note:
■
Color Fax transmission is not available during the transmission or reception of other data.
■
When the Document Glass is used for Color Fax, only one page can be scanned for one job.
■
Color Fax may not work properly if the receiving or sending end is not DocuPrint C3290 FS.
■
Even if a communication error occurs during Color Fax transmission, the printer will not retry
transmission.
■
The transfer of Color Fax jobs is not supported.
Color Fax is not available for the Direct-Fax feature.
■
■
Color Fax is not available for group faxing.
To enable the sending of a color fax:
1.
Press the System button.
2.
Select
Admin Menu
3.
Select
Fax Settings
4.
Select
, and then press the OK button.
Color Fax
5.
Press the Up Arrow or Down Arrow to change the setting to
, and then press the OK button.
, and then press the OK button.
to
for the hour, and then press the Forward Arrow or Back Arrow
0
23
to
for minutes, and then press the OK button.
0
59
with a Delayed Start job stored, the job will be processed
Off
, and then press the OK button.
, and then press the OK button.
Selecting Fax Options for Single Jobs
.
On
On
.
8-145
Hide quick links:
Advertisement
Table of Contents
