Xerox DocuPrint C3290 FS User Manual page 171

■ DRPD Pattern: Specifies a distinctive ring pattern for use with DRPD service. DRPD Patterns are
specified by your telephone company. The patterns provided with your multifunction printer are shown
below:
■ Forward Settings: Specifies when the printer should forward all of the outgoing faxes to a specified
destination.
■ Trans. at Error: Outgoing faxes are forwarded only when an error occurs.
Trans. Always: Outgoing faxes are always forwarded.
■
■ Not Trans.: Outgoing faxes are not forwarded.
■ Fwd. Settings Num: Specifies the number that outgoing faxes are forwarded to.
■ Fwd. Set Print: Specifies if the outgoing faxes should be printed when they are forwarded. When set
to On, all of the forwarded faxes are printed.
■ Prefix Dial: Specifies whether or not to add the prefix number when you send a fax.
Prefix Dial Num: Specifies the prefix dial number, up to five digits. This number dials before any auto
■
dial number is started. It is useful for accessing the PABX exchange.
■ Discard Size: Specifies if the printer should discard any excess data at the bottom of the page.
■ On: Discards any excess data at the bottom of the page.
■ Off: Prints any excess data at the bottom of the page without discarding it.
Auto Reduction: Reduces the document to fit onto the paper.
■
■ Color Fax: When set to On, both black and white and color fax jobs are enabled. When set to Off,
color fax jobs are disabled.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
9-168
Description of Menu Items
6180mfp-060