Tray Settings - Xerox DocuPrint C3290 FS User Manual

Tray Settings

There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3. You can set
paper size and paper type for each tray under these menus. (Display Pop-up and MPT Mode can only be set
for Tray 1 (MPT).)
Tray 3 is displayed only when the optional sheet feeder is installed.
The settings menu for Tray 1 (MPT) is displayed only when the MPT Mode is set to Panel Specified.
Common Settings for Tray 1 (MPT), Tray 2, and Tray 3
■ Paper Type: Specifies the type of paper loaded in each tray.
■ Tray 1 (MPT) (default: Thin Card Stock)
Tray 2 (default: Plain)
■
■ Tray 3 (default: Plain)
For details, refer to
■ Paper Size: Specify the paper size and orientation for each tray.
■ Tray 1 (MPT) (default: Driver Size)
■ Tray 2 (default: Auto)
■ Tray 3 (default: Auto)
For details, refer to
Settings Exclusive to Tray 1 (MPT)
Display Popup: Specifies whether or not to display the message that prompts you to set the paper size
■
and type every time you load paper in Tray 1 (MPT).
When you select On, the message that prompts you to set the paper size and type is displayed. The
default is Off.
MPT Mode: Specifies the way to set the paper type and size settings to be loaded in Tray 1 (MPT).
■
When the size or type of paper that is loaded is different from the setting, the print quality may suffer
or paper may jam. Specify the correct paper type and size.
■ Panel Specified (default): You can specify the paper type and size settings on the control panel.
Printing can be done only when the settings on the print driver match the settings on the control
panel. When a mismatch of paper sizes occurs, follow the instructions displayed on the control
panel.
Driver Specified: You cannot specify the settings on the control panel. Printing is done using the
■
settings on the print driver.
When installing the optional sheet feeders if Paper Tray is set to Auto on the print driver, the feeding tray
is automatically specified according to the setting on the control panel. Also, when the paper size and type
setting for each tray is the same, printing continues by changing the feeding tray if the paper in the
specified tray has run out.
Setting Paper Types and Sizes
Setting Paper Types on page 5-63.
on page 5-63.
9-160
Description of Menu Items