Xerox DocuPrint C3290 FS User Manual page 111

Setting Auto Exposure
Papers that are "less-white", newsprint or ivory colored for example, can cause the printer to put toner on
the page so that the printed output has a background that matches the original. The Auto Exposure setting
removes the light or close to white color and only the image itself is printed. Auto Exposure is turned on by
default.
Turning Auto Exposure On/Off
To turn Auto Exposure on/off:
1.
On the control panel, press the System button.
2.
Select
Default Settings
3.
Select
Copy Defaults
4.
Select
Auto Exposure
5.
Press the Up Arrow or Down Arrow button to select
Setting the Auto Exposure Level
To set the auto exposure level manually:
1. On the control panel, press the System button.
2.
Select
Default Settings
3.
Select Copy Defaults
4.
Select Auto Exposure Level
5.
Press the Up Arrow or Down Arrow button to select the Auto Exposure level, and then press the OK
button.
Adjusting Color Balance
The Color Balance control allows you to adjust the print color of your printer. Three density settings exist
for each of the four colors: yellow, magenta, cyan, and black. The Low, Medium, and High density settings
adjust the output based on the level of color saturation. Examples of low density areas include faces and
sky.
1.
On the control panel, press the Copy button.
2.
Select Color Balance
3.
Select the color that you would like to adjust, and then press the OK button.
4.
Select the density level that you would like to adjust,
button.
5. Adjust the density setting with the Up Arrow or Down Arrow.
Adjusting the setting negatively lowers (lightens) the density, and adjusting the setting positively will
increase (darken) the density.
6. Press the OK button to accept the new setting.
7. You can select another color and adjust it's density, or press the Exit button to leave this portion of the
menu.
To adjust the Color Balance default setting, see
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Selecting the Default Copy Settings
or , and then press the OK button.
On Off
, , or
Low Medium
6-108
Adjusting Copying Options
, and then press the OK
High
on page 6-105.