Table of Contents
Advertisement
Setting/Exiting the Power
Saver Modes
The printer has a power saving feature which
reduces power consumption during periods of
inactivity. This feature operates in two modes: the
Low Power mode and Sleep mode.
As delivered, the printer switches to the Low
Power mode 3 minutes after the receipt of the last
print request. The printer then switches to the
Sleep mode after another 5 minutes of inactivity.
When the printer is in the Low Power mode, the
display shows [Ready/Standby]. In the Sleep
mode, all lamps on the control panel except for the
<Power Saver> button go out. The display also
goes blank and displays nothing.
The factory default settings of 3 minutes (Low
Power mode) and 5 minutes (Sleep mode) are
changeable within the range of 1 - 60 minutes
(Low Power mode) and 1 - 120 minutes (Sleep
mode). The printer consumes less than 5 W in the
Sleep mode, and returns to the ready-to-print
state in about 16 seconds when re-activated.
Note
• You can program your printer to disable the Sleep mode
unless your printer is the model available in China. The
Sleep mode cannot be disabled on the Chinese model.
Exiting the Power Saver Modes
The printer automatically exits the Power Saver
modes when it receives a print job from a
computer.
To manually exit the Low Power mode, press any
button on the control panel. To exit the Sleep
mode, press the <Power Saver> button.
Note
• When the printer is in the Low Power mode, opening
and closing a cover will cause the printer to exit the Low
Power mode.
• When the printer is in the Sleep mode, all buttons on the
control panel except for the <Power Saver> button do
not function.
To use the buttons on the control panel, press the
<Power Saver> button to exit the Sleep mode.
30
2 Basic Operation
Cancelling a Print Job
Print jobs can be cancelled either from your
computer or on the control panel.
Cancelling a Print Job being
Processed on a Computer
1.
Double-click the printer icon
bar at the lower right corner of your monitor.
2.
On the displayed window, click the name of
the document you want to cancel and press
the <Delete> key. If you cannot find the
document in the window, cancel the
document on the control panel.
Cancelling a Print Job being Printed/
Received on the Printer
Press the <Cancel Job> button on the control
panel. This operation, however, does not cancel
the page that was being printed when you pressed
the button.
Importing Printer
Information to a Print
Driver
If your printer is networked, you can import printer
information (such as accessory configuration,
sizes and types of paper in the paper trays) into
your print driver using SNMP protocol. This can be
done on the [Options] tab on your print driver.
The following procedure is described based on
Windows XP using the PCL print driver.
Note
• This feature is not available when your printer is a local
printer, and you must manually set the information on
your print driver. Also, the sizes and types of paper
loaded in each tray will not be displayed on the print
driver.
• When your printer is a local printer, you can check the
accessory configuration by printing out the [Printer
Settings] list.
on the task
Advertisement
Table of Contents
