Table of Contents
Advertisement
2
Basic Operation
Main Components and Functions
Main Unit
Front/Left View
No.
Name
1
Top cover
2
Ventilation hole
3
Control panel
4
Upper cover
5
Front cover
6
Bypass tray
7
Power switch
8
Tray 1
9
Trays 2, 3, & 4
(250/550 sheet feeders
(optional))
10
Ventilation hole
Opened when replacing the print cartridge or clearing paper jams.
Releases heat to prevent the interior of the printer from overheating.
Important
• Do not place any objects on the ventilation hole. Locking the ventilation hole
causes heat build-up in the printer, which causes the printer to malfunction.
Consists of the control buttons, indicator lamps, and a display. For details, refer
to "Control Panel" (P. 28).
Opened when installing the duplex unit (optional) or cleaning the feed rolls.
Opened when replacing the print cartridge or clearing paper jams.
Load paper here when printing using the bypass tray. The bypass tray can
accommodate plain paper and special media such as postcards and
envelopes. It can be extended in two stages as necessary.
Switches the printer on/off. Pressing this to the <|> position switches the power
on, and pressing it to the <O> position switches the power off.
Load paper here. This is the standard paper tray.
Load paper here when the optional 250/550 sheet feeders (hereinafter referred
to as "sheet feeders") are installed. The above illustration shows the printer with
three sheet feeders (optional).
Note
• The trays 2, 3 and 4 can be added to the DocuPrint 3055.
• The trays 2 and 3 can be added to the DocuPrint 2065.
Releases heat to prevent the interior of the printer from overheating.
Note
The illustration on the left is based on the
DocuPrint 3055. The optional tray 4 can be
installed only to the DocuPrint 3055.
Description
Main Components and Functions
IE
IE
25
Advertisement
Table of Contents
