Xerox DocuPrint 3055 Quick Reference Manual page 23

CentreWare Internet Services Setting Items
The followings are the main features on each tab of CentreWare Internet Services.
Tab Name
Status • General
• Printer Status
• Fault Status
Jobs • Displays the job status list and job history list.
Properties • Description
• Configuration
• Usage Counters
• Initialization
• Security
• StatusMessenger
• Internet Services Settings
• Port Status
• Port Settings
• Protocol Settings
Print
• Print Auditron
• Logical Printer Settings
Support • Displays a link to customer support.
* These items can be configured only on CentreWare Internet Services and not on the control panel.
The security features are not supported on the model available in China.
Displays the printer's product name, IP address, and status.
Displays the sizes and remaining volumes of the paper loaded in the paper trays, the
status of the output tray, and the remaining life of the print cartridge.
Displays the status of the control panel and error information (error location and
details).
Displays the printer's product name and serial number. It also sets the printer's
name*, installation location*, contact person*, and administrator's e-mail address*.
Displays the specifications of the print features, page description languages, and
memory information.
Displays the total number of pages printed to date.
Initializes the NV memory or reboots the printer.
*
Creates/manages/deletes self-signed certificates and enables SSL/TLS
communication.
This item appears only when the network expansion card (optional) is installed.
*
The printer can notify its status via e-mail to users who have been registered through
this feature. You can set the e-mail addresses of the users and the items or events
that the users will be notified of.
*
Sets whether or not to automatically update the window of CentreWare Internet
Services and the interval at which the window is updated (in seconds). This also
enables or disables the Administrator Mode and sets the administrator's ID and
password, if the Administrator Mode is enabled.
The default system administrator ID and password are "11111" and "x-admin",
respectively. Make sure to change the password before using the Administrator
Mode.
Enables or disables each port.
Sets the settings for Ethernet.
*
Sets the details of each protocol.
*
This feature allows you to control user access to the printer. If enabling this feature,
register users who are granted access to the printer.
*
Sets PostScript and ESC/P logical printers. [PostScript] appears only when the
PostScript software kit (optional) is installed.
Configuring the Printer Using CentreWare Internet Services
Feature
IE
IE
23