Figure 40 Interface Tab For Graphing Ports; Table 33 Port Interface Tab Fields For Multiple Ports - Nortel BayStack 380-24F Reference

Figure 40 Interface tab for graphing ports

Table 33 describes the Interface tab fields for graphing ports.

Table 33 Port Interface tab fields for multiple ports

Field
ifInOctets
ifOutOctets
ifInUcastPkts
ifOutUcastPkts
ifInNUcastPkts
ifOutNUcastPkts
InDiscards
OutDiscards
Reference for the BayStack 380-24F Gigabit Switch Management Software
Chapter 3 Configuring and graphing ports 87
Description
The total number of octets received on the interface, including
framing characters.
The total number of octets transmitted out of the interface,
including framing characters.
The number of packets delivered by this sublayer to a higher
sublayer that were not addressed to a multicast or broadcast
address at this sublayer.
The number of packets that higher-level protocols requested be
transmitted that were not addressed to a multicast address at this
sublayer. This total number includes those packets discarded or
unsent.
The number of packets delivered by this sublayer to a higher
(sub)layer, which were addressed to a multicast or broadcast
address at this sublayer.
The total number of packets that higher-level protocols requested
be transmitted, and which were addressed to a multicast or
broadcast address at this sublayer, including those that were
discarded or not sent.
The number of inbound packets that were chosen to be discarded
even though no errors had been detected to prevent their being
deliverable to a higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding such a
packet could be to free up buffer space.