Accepting Untagged Frames; Figure 50 Vlan Tab - Nortel BayStack 380-24F Reference

108 Chapter 5 Creating and managing VLANs

Accepting untagged frames

In the BayStack 380-24F, you configure whether or not untagged frames are sent
or received on the port level. Refer to
VLAN tab field descriptions. You can select whether or not to discard untagged
frames received on a port:
The default is not to discard the untagged frames. You can also designate the
port-based VLAN to which these frames are assigned by setting the untagged
port's default VID (the default is 1).
To set a port to discard untagged frames it receives:
1
In the Device Manager main window, select a port.
2
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed
page
3 Click the VLAN tab.
The VLAN tab opens

Figure 50 VLAN tab

Select the DiscardTaggedFrames and the DiscardUntaggFrames check boxes.
4
Click Apply.
214393-A
76).
(Figure
"VLAN tab for a single port" on page 78
50).
for
(Figure 35 on