16 Hardware Troubleshooting
ATTENTION
Call Nortel for RMA if Amber System status LED can not be cleared.
Ports to open in a firewall
If there are one or more firewalls in between the Defense Center and
Intrusion Sensors, then you will need to open one or more ports on the
firewall, depending on the software version of the TPS devices.
Software release 4.5.x and above
The Defense Center and the Intrusions Sensors communicate on TCP port
8305 only, by default. The administrator can change this port number.
Software release 4.1.x and below
The Defense Center and the Intrusions Sensors communicate on the
following TCP ports.
TCP Port
22
8300
8301
8302
8303
Copyright © 2007 Nortel Networks
.
Direction To/From DC
SSH
Outbound from DC to Sensor
SSL
Inbound from Sensor to DC
SSL
Inbound from Third Parties to
DC
SSL
Inbound from Sensor to DC
SSL
Inbound from Sensor to DC
Nortel TPS 4.7
Threat Protection System Troubleshooting Guide
NN47240-700
11 2007
Description
DC uses this port to push
configurations, updates, & HA
Management functions
eStreamer API (event data
streams)
eStreamer from Intrusion
Sensors
Heartbeat Protocol
01.01
Standard