Table of Contents
Advertisement
Table 54 General tab items (continued)
Items
SecurityAction
CurrNodesAllowed
MaxNodesAllowed
PortLearnStatus
CurrSecurityLists
MaxSecurityLists
Reference for the BayStack 380-24F Gigabit Switch Management Software
Chapter 9 Security parameters 147
Description
Actions performed by the software when a violation occurs
(when SecurityStatus is enabled). The security action
specified here applies to all ports of the switch.
A blocked address causes the port to be partitioned when
unauthorized access is attempted. Selections include:
•
noAction: Port does not have any security assigned to it,
or the security feature is turned off.
•
trap: Listed trap.
•
partitionPort: Port is partitioned.
•
partitionPortAndsendTrap: Port is partitioned and traps are
sent to the trap receiver.
•
daFiltering: Port filters out the frames where the
destination address field is the MAC address of
unauthorized Station.
•
daFilteringAndsendTrap: Port filters out the frames where
the desitnation address field is the MAC address of
unauthorized station. Traps are sent to trap receiver(s).
•
partitionPortAnddaFiltering:
filter out the frames with the destination address field is the
MAC address of unauthorized station.
•
partitionPortdaFilteringAndsendTrap:
partitioned and will filter out the frames with the destination
address field is the MAC address of unauthorized station.
Traps are sent to trap receiver(s).
Note: "da" means destination address.
Current number of entries of the nodes allowed in the
AuthConfig tab.
Maximum number of entries of the nodes allowed in the
AuthConfig tab.
Set of ports where auto-learning is enabled.
Current number of entries of the Security listed in the
SecurityList tab
Maximum entries of the Security listed in the SecurityList tab.
Port is partitioned and will
Port is
Advertisement
Table of Contents
