Security, Insert Authconfig Dialog Box; Table 57 Authconfig Tab Fields - Nortel BayStack 380-24F Reference

Table 57

Table 57 AuthConfig tab fields

Field
BrdIndx
PortIndx
MACIndx
AccessCtrlType
SecureList

Security, Insert AuthConfig dialog box

Security, Insert AuthConfig dialog box has editable fields for the AuthConfig tab.
Each row in this dialog box has information that can be updated or changed.
To view the Security, Insert AuthConfig dialog box:
1
From the Device Manager menu bar, select Edit > Security.
The Security window opens with the General tab displayed
page 146).
2
Click the AuthConfig tab.
The AuthConfig tab opens
3
Click inside a row.
4
Click Insert.
The Security, Insert AuthConfig dialog box opens
Reference for the BayStack 380-24F Gigabit Switch Management Software
describes the AuthConfig tab fields.
Description
Index of the slot containing the board on where the port is located.
This value is meaningful only if SecureList value is zero. For other
SecureList values, this parameter should have the value of zero.
Index of the port on the board. This value is meaningful only if
SecureList value is zero. For other SecureList values, this
parameter should have the value of zero.
An index of MAC addresses that are either designated as
(station) or
allowed
Displays whether the node entry is
. A MAC address may be allowed on multiple ports.
blocked
The index of the security list. This value is meaningful only if
BrdIndx and PortIndx values are set to zero. For other board and
port index values, it should also have the value of zero.
The corresponding MAC Address of this entry is allowed or
blocked on all ports of that this port list.
(Figure 77 on page
Chapter 9 Security parameters 151
(station).
not-allowed
node allowed
150).
(Figure
or node
(Figure 74 on
78).