To Stop The Transmission; Making Copies; Using The Adf - Toshiba e-STUDIO190F Operator's Manual

To Stop the Transmission

1
NOTE: To select the Comm. Journal printout condition, change the

Making Copies

1
Face Up
Original Guides*
Adjust to the
original's width.
*Hold the center of the guides
when adjusting the width.
Original Size: Invoice - Legal

Using the ADF

Originals that cannot be used
• Post Cards, Drawing Papers, Transparencies,
Labelling Papers, Heavyweight Papers, Thin Art Papers,
Film, Thermal papers
Inappropriate Originals
• Paper with a smooth surface such as glossy and coated
papers
• Originals with a Lead Edge that is ripped, creased,
folded, punched, or glued
• Mix-sized Originals (except a combination of Legal and
Letter)
• Post-it Notes
• Pressure sensitive or carbon backed papers
• Paper with excessive curl
• Stapled originals
• Freshly printed copies from a laser printer
• Originals with fresh White-Out (Liquid paper correction
fluid)
26
Getting To Know Your Machine
Operation Chart
2
COMMUNICATION STOP ?
1:YES 2:NO
setting of Fax Parameter No. 12. (See page 112)
2
Max. 100 pages
(Letter size originals)
NOTE:
1.The default original size is "LETTER".
If you use the Multi-Size Feeding function,
change the default original size to "MIX" in the Copier Settings (For Key
Operator), Parameter No. 13 (ORIGINAL SIZE). (See page 121)
2.This function is available only when the optional Tray-2 is installed and
both Legal and Letter-R size papers are loaded in Tray-1 and Tray-2
respectively.
Original Guides
Adjust to the original's width.
NOTE:
You must not try to send/scan an original shorter
than 4.7 inches (120 mm).
3
SAVE AS INCOMP.FILE?
1:YES 2:NO
: Save the file.
1
: Delete the file.
2
• If FAX Parameter No. 31
is set
(Incomplete File Save)
to
"Valid" (See Page 113).
• To retry an Incomplete File,
see page 84.
3
Original Size
Upper Limit Indicator
B
Upper Limit Guide (B)
Set the originals up to the
upper limit indicator (A)
and guide (B)
ADF Tray
(A)
A