General Description
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code
is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to reenter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.
Setting the Access Code
1
Operating FAX with the Access
Restrict all Operatings
1a
1a
MMM-dd-yyyy 15:00
ACCESS CODE=
Restrict the Operation of Setting/Printing
the Fax Parameters Only
(Ex: When setting the Fax Parameter.)
1b
NOTE
86
Facsimile Features
Access Code
2
FAX PARAMETER(1-169)
4-digit Access Code
Ex: 1234
1. To erase the Access Code, enter the Access Code and press
procedure above to Step 2, then press
NO.=
4-digit Access
Code
Ex: 1234
2a
2a
MMM-dd-yyyy 15:00
ACCESS CODE= ****
2b
ENTER ACCESS CODE
4-digit Access Code
Ex: 1234
,
CLEAR
SET
3
38 ACCESS CODE
and follow the
SET
and
.
STOP